Skip to main content
AlpacaBridge

Every driver, ConformU-verified.

AlpacaBridge ships native ASCOM Alpaca drivers for real astronomy gear. Each one is validated against the official ASCOM conformance suite on the exact hardware it supports. If it's listed here, it's been proven on Debian 13 (Trixie) arm64.

ConformU-verifiedDebian 13 · arm6416 brands80+ devices

Proven, not promised

Only drivers that pass ConformU verification are listed. Each entry links to its validation output in the AlpacaBridge repo. No "should work," only "does work."

Vendor-backed

Manufacturers including iOptron, Player One, QHY, ToupTek Astro, and Wanderer Astro supply hardware directly for driver development.

Always growing

New drivers are added continuously as they clear conformance. This page is generated from the full matrix and tracks it automatically.

Don't see your exact model?

The devices listed below are the ones we've individually ConformU-verified. Because each driver is built on the vendor's own SDK, other models from the same brand generally work too. A listed camera, mount, or focuser means its whole family is very likely supported; it just hasn't been verified on that specific unit yet. If you run gear that isn't listed, let us know on Discord and we'll help confirm it.

Platform

All drivers are built and validated on Debian 13 (Trixie) arm64 (Raspberry Pi 3B+/4/5, Rockchip SBCs, OrangePi, iOptron iMate). Kernel 6.12.75-v8-16+ or higher is required for full ZWO EAF/EFW compatibility. See the install guides to get set up.

Cameras​

34 cameras across eight brands, from dedicated cooled astronomy cameras to everyday DSLR and mirrorless bodies.

Astronomy Cameras​

28 cameras from six brands, cooled and uncooled, with cooling, dew-heater, and pulse-guiding support gated per model.

DSLR & Mirrorless​

Supported through the GPhoto driver, which talks generic PTP rather than a per-model SDK, so other Canon, Nikon, and Sony bodies that libgphoto2 recognizes should work too. ISO is exposed as a discrete gain list, and bulb exposures past the body's 30 s ceiling are supported.

Mounts​

Alt-az and equatorial mounts over USB/serial or Wi-Fi, including full ZWO harmonic-drive and iOptron support, plus a direct motor-controller driver for Sky-Watcher Wave and EQM-35 Pro.

Pending re-validation on arm64: ZWO AM5, ZWO AM7. These drivers exist but are not listed above until they pass ConformU again.

Focusers​

Filter Wheels​

Rotators​

Cover Calibrators​

Switches & Power​

Power boxes, dew heaters, and thermal control, exposed as ASCOM Switch devices for slider and toggle control in your imaging app.

Weather & Observing Conditions​

Weather stations and sky quality via WeeWX. See the WeeWX Weather guides for setup.

Unihedron SQM-LE (WeeWX plugin)WeeWX (HTTP/JSON weather stations)

Domes and Safety Monitors interfaces are in development and will appear here once they pass ConformU. Want a device added? Bring it to Discord or open an issue on GitHub.

Generated from the AlpacaBridge supported-drivers matrix (last updated upstream 2026-10-02).